It is very exciting getting into the art of woodworking. However, with it being such a large field, many people can feel a little uneasy trying to start out. Don’t let this happen to you. Instead, embrace the following tips, and get started today putting your skills to work with some wood.
Safety must be a priority when doing woodworking. Always ensure that safety comes first, and you know how to properly use all the tools. Do not take guards off of power machines, because they are meant to protect you. The last thing you want to do is end up at the emergency room because of an accident.
Using a good wood glue can make joined pieces even stronger than the wood itself. The key to strength in a glued joint is the amount of time the glue takes to set. Glue that takes longer to cure is better than quick setting glue. Slower setting glue has more time to penetrate into the fibers of the wood, which enhances the strength of the joint.
Stir your paint and stain, don’t shake it! Ingredients may have settled onto the bottom as they sat on the shelf. But, if you shake it could cause bubbles to form which would mean it wouldn’t mix too well. Be sure you stir it up until your mix is dispersed correctly and in a smooth manner.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
Keep the floors safe in your woodworking shop. Dust builds up on the floor, making it dangerous for walking. Coat the slippery areas of your shop with a mixture of crushed walnut shells and paint. The walnut shells are just the right consistency to keep the floor rough enough for walking, even when sawdust builds up.
Avoid using your fingers as guides while cutting narrow pieces of wood. Instead, use a long, thin strip of wood to push the piece through the saw. This will help ensure you keep all of your fingers, making woodworking much easier.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
If you have any pockets on the shirt you are wearing, remove everything from them before you start working with a table saw. It is very common for objects like pens and rulers to fall from your pocket and get caught in the blade, which can lead to some pretty serious injuries.
Woodworking is a craft enjoyed by young and old alike and has been treasured for centuries. In order to get the most out of it, you must be working towards honing your skills. So, use the tips that have been discussed to help you get going in the right direction today.…Details